www.nkp-centretrading.com/ TEL-TRU Pressure guage - http://www.nkp-centretrading.com

http://www.nkp-centretrading.com

Go to content

Main menu

TEL-TRU Pressure guage

Product Instrument > TEL-TRU

Download Catalog and Spec .

http://www.teltru.com


TEL-TRU Pressure guage
Product For
 PRESSURE GAUGES MODEL:

  • Model 10 0.5% Process, Solid Front, Blowout Back Case, Receiver, Altitude

  • Model 30 1% Stainless Steel Dry or Liquid Filled

  • Model 31 1% Stainless Steel Dry or Liquid Filled 6-7 4" Solid Front

  • Model 32 1.5% Stainless Steel Dry or Liquid Filled

  • Model 33 Industrial/Hydraulic

  • Model 37 1.5% Low Pressure 4"

  • Model 42 0.25% Test

  • Model 50 Metal Case Utility

  • Model 51 Plastic Case Utility

  • Model 52 4-1/2" Mechanical Contractor

  • Model 55 Low Pressure Diaphragm Utility

 ACCESSORIES:

  • Siphons 21

  • Gauge Cocks 21

  • Mini Needle Valve 21

  • Ray Pressure Snubbers™

 DIAPHRAGM SEALS:

  • Threaded, Flanged, Welded

  • Mini Seals

  • Sanitary

TEL-TRU Pressure guage
GENERAL INFORMATION  
  - All gauge components should be selected based upon knowing the pressure,temperature, and media to prevent misapplication. Improper installation can
damage the gauge and/or cause failure resulting in personal injury or property damage. The information in this catalog is offered as a guide to assist in the
proper selection of pressure gauges.
 - The operating conditions of a pressure gauge must always be considered. Pressure gauges should be protected against sudden pressure changes,
temperature changes, pulsation and/or mechanical vibration. The proper application of accessories will solve most problems.
 - Pressure gauges should not be exposed to pressures greater than maximum dial reading. It is recommended that the maximum working pressure be in the
middle one-third of the scale range when the pressure being measured is steady pressure. For fluctuating pressures the maximum working pressure should be
no more than one-third of the full scale range. Compound ranges are recommended when the pressure to be measured will vary between vacuum and above
atmospheric pressures.
 - Since the measuring element of the pressure gauge may be directly exposed to the measuring media,complete information about the media exposure of the
pressure gauge should be obtained to select the proper gauge materials. If the media is corrosive or would solidify in the pressure gauge, a diaphragm seal
protector should be used.
 - The ambient atmosphere in which the pressure gauge is to be installed will have a direct effect on the use, life, and accuracy of the instrument. The
atmospheric condition can attack inner gauge components or allow dirt to impair the operation of the pressure gauge.

  PRESSURE GAUGES MODEL:

  • Model 10 0.5% Process, Solid Front, Blowout Back Case, Receiver, Altitude


 

  PRESSURE GAUGES MODEL:

  • Model 30 1% Stainless Steel Dry or Liquid Filled


 

  PRESSURE GAUGES MODEL:

  • Model 31 1% Stainless Steel Dry or Liquid Filled 6-7 4" Solid Front


 

  PRESSURE GAUGES MODEL:

  • Model 32 1.5% Stainless Steel Dry or Liquid Filled


 

  PRESSURE GAUGES MODEL:

  • Model 33 Industrial/Hydraulic


 

  PRESSURE GAUGES MODEL:

  • Model 37 1.5% Low Pressure 4"

 

  PRESSURE GAUGES MODEL:

  • Model 42 0.25% Test


 

  PRESSURE GAUGES MODEL:

  • Model 50 Metal Case Utility


 

  PRESSURE GAUGES MODEL:

  • Model 51 Plastic Case Utility


 

  PRESSURE GAUGES MODEL:

  • Model 52 4-1/2" Mechanical Contractor


 

  PRESSURE GAUGES MODEL:

  • Model 55 Low Pressure Diaphragm Utility

 

 

 ACCESSORIES:

  • Siphons 21

  • Gauge Cocks 21

  • Mini Needle Valve 21

  • Ray Pressure Snubbers™


 

DIAPHRAGM SEALS:

  • Threaded, Flanged, Welded

  • Mini Seals

  • Sanitary


 
 
Back to content | Back to main menu